Rooftop solar project: Medco Ratch Power Riau, Pelalawan, on the office building roof

LEIN project Medco Ratch Power Riau · Pelalawan · 47.52 kWp on the office building roof

Sunshine, engineered.

Since 2016, LEIN Power has designed, built and maintained rooftop solar for industry and commercial buildings, and hybrid solar with a battery for homes.

Watch the sun at work.

16.9 kWp solar · 26 × 650 Wp | 15 kW inverter | 41.4 kWh battery · 2 × 20.7 kWh

Illustration: a two-storey tropical villa with 26 solar panels on the roof, and an inverter, a backup box and two battery stacks on the stone wall by the garden
The sun is rising and energy use goes up. The battery powered the home overnight and is now at its 20% reserve. The panels are only just starting to produce, so PLN covers the rest for now. At 07:00: Solar 0.9 kW, Inverter supplying 0.9 kW, PLN 1.1 kW, Home 2 kW, Battery standby (20% charged).

Illustrative image. Home use and solar output come from monitoring data of a LEIN home system, scaled to this array; battery figures are simulated.

Simulation details

kW figures are a LEIN simulation for a home with 16.9 kWp of solar (26 × 650 Wp), a 15 kW inverter and a 41.4 kWh battery. Home use and solar output are averaged from two days of monitoring data from a LEIN on-grid home system (15.12 kWp, August 2026), with solar output scaled to this array size. Hybrid: the surplus charges the battery, which is full by mid-afternoon and powers the home after sunset down to a 20% reserve. On-grid is the same home without a battery: its midday surplus flows to PLN and does not reduce the bill. Off-grid has no PLN: evening and night use is about 30% lower than in the monitored home, so the battery lasts until morning, and a diesel genset is the backup for long overcast spells. Image: illustration, not a LEIN project; equipment compatibility is subject to design.

Illustrative image and LEIN simulation figures, not a project result.

Simulation details

kW figures are a simulation: a 24-hour factory on three shifts with a working-day load of about 3,000 kW (around 80% of its PLN connection) and 900 kWp of on-grid rooftop solar (8 inverters, 750 kW AC) with zero export. Solar output follows hourly monitoring data from a LEIN factory system of this size (February to November 2026): up to 750 kW at midday on a clear day, and far less under cloud or rain. At night the panels do not produce, and the second and third shifts run on PLN. In the simulation, the diesel genset is sized at about 130% of the PLN connection and can run for up to about 6 hours, so the whole load keeps running during an outage. Image: illustration, not a LEIN project.

Illustrative image and LEIN simulation figures, not a project result.

Simulation details

Figures are a LEIN simulation of an island resort in eastern Indonesia without PLN, using about 40 kW day and night, with 220 kWp of solar, a 720 kWh battery (BESS), a 100 kVA diesel genset and an energy management system (EMS). Solar output follows LEIN’s energy model for a clear day; a cloudy day gives 30% of that and a rainy day 10%. Over a simulated year, the genset alone would use about 119,000 litres of diesel; with solar and the BESS, about 10,000 to 29,000 litres, depending on solar output, BESS cooling and BESS ageing. Image: illustration, not a LEIN project.

See how many panels fit on your roof and what they save.

Solar Roof Calculator

Residential solar

For factories and commercial buildings, we design the system around your daytime use and your PLN bills.

Get A Quote (opens another website)

Commercial & industrial solar

75–90% less diesel

LEIN simulation for an island resort in eastern Indonesia, compared with running the genset alone: fewer fuel deliveries by boat and quieter nights.

For resorts and sites without PLN, we design off-grid hybrid systems around your daily load profile and your genset.

Get A Quote (opens another website)

Off-grid hybrid design

Clean energy, counted.

Installed capacity
28.5 MWp
Projects installed
189
Established
2016
Solar power a year*
37 GWh
CO₂ avoided a year*
32,000 tonnes

*Estimates: 28,503 kWp installed × about 1313 kWh per kWp a year (solar yield in Jakarta, Global Solar Atlas, World Bank and Solargis) × 0.87 t CO₂ per MWh (Java–Madura–Bali grid emission factor for 2019, set by the Ministry of Energy and Mineral Resources in 2021).

Trusted across Indonesia.

Our clients

Licences and certifications

PT Lembaga Energi Indonesia was founded in Jakarta in 2016. Our licences and certificates can be checked at their official sources.

See all licences and certifications

Rooftop solar project: Xurya, Hospitality & leisure, Bali

LEIN project Xurya · Hospitality & leisure · Bali · 177.48 kWp

Why choose LEIN Power?

What we hold to on every project.

  • Sized for your needs

    We size every system to your daytime use, because since Minister of Energy and Mineral Resources Regulation No. 2 of 2024, power exported to PLN no longer reduces your bill. Premium Tier 1 systems are our first choice, mounted with the method that suits your roof type.

  • Our own engineering team

    Surveys, design, simulation and site supervision are handled by LEIN’s engineering team.

    250+ MWp of feasibility studies across Indonesia

  • Clear warranties and support

    Manufacturer warranties on the equipment, a 1-year LEIN workmanship warranty, 10 years on the mounting structure, and free support with warranty claims.

    Warranty and care

  • Monitoring in your name

    Systems are registered in your name on the manufacturer’s monitoring app, with LEIN as the installer, so the data and the warranty stay in your name.

    See the monitoring app

  • We prepare the technical documents and support you through PLN approval and the operating certificate (SLO) until your system is officially running. Licences and permits

  • Recognised by industry and government. Awards and recognition

5 easy steps to enjoy solar.

  1. Site survey

    An online survey, then a site visit to check the roof and distribution board.

  2. Design engineering

    A panel layout, a production estimate and a proposal with the equipment and price.

  3. Procurement

    Equipment from authorised distributors, with the manufacturers’ warranties.

  4. Installation

    Installation and testing supervised by our engineering team.

  5. Monitoring

    A system registered in your name on the monitoring app.

Residential solarCommercial & industrial solar

Ready to make the switch?

Enter your monthly PLN bill for a first estimate, or talk to our team on WhatsApp.

Chat On WhatsApp (opens another website)

Prefer email? Request a quote

Or see what we do for homes or for factories and buildings.